IMIX®-3S+ IMIX®-3S+A IMIX®-5S+ IMIX®-5S+AINSTALLATION & OPERATING GUIDEBUNN-O-MATIC CORPORATIONPOST OFFICE BOX 3227SPRINGFIELD, ILLINOIS
10PROGRAMMING CUP SIZES - Portion Control Models The cup size can be programmed in portion control models by “EXAMPLE” or “TIME”. Programming by EX-A
11PORTION CONTROL ? NO EXIT YESPress and release right switch (advance to next menu), “TANK TEMP XXX°” appears on screen.PROGRAMMING THE DISPENSER (
12XX° CAL XX° (-) Tank Temp (+)PROGRAMMING THE DISPENSER (cont.)DRINK STRENGTH 1 (-) XX (+)PRESS DISPENSETO CHECK TASTETASTE 1
13PROGRAMMING THE DISPENSER (cont.)RINSE ALARM ? NO EXIT YESHEAD 1 DISABLE ? NO EXIT YESSET PASSWORD ? (-) XXXX (+)Returns to (G) (pag
238987 080112BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTYBunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:1) Airpots, thermal
3WARNING!Fill water tank before turning - on - thermostat or connecting applianceto power source.Use only on a properly protectedcircuit capable of th
4ELECTRICAL REQUIREMENTSCAUTION - The dispenser must be disconnected from the power source until specified in Electrical Hook-Up.The 120 volt version o
538987 120513PLUMBING REQUIREMENTSThis dispenser must be connected to a cold water system with operating pressure between 20 and 90 psi (138 - 620 kPa
638987 120513RUNNING A RINSE SEQUENCE1. Place the Normal/Program/Rinse switch (page 9) in the “rinse” position.2. Sequentially at each position, pr
7CLEANINGThe use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all sur-faces on Bunn-O-Matic equipmen
8Adjust tank temperature (190° F maximum)Adjust minimum tank ready temper-ature for lockout (185° maximum)Adjust hopper motor speed for station select
9Digital Beverage ControlDigital Beverage ControlSTOPPROGRAM HOME SCREEN The screen above will be shown when the dispenser is ready for use.
Kommentare zu diesen Handbüchern