INSTALLATION & OPERATING GUIDEBUNN-O-MATIC CORPORATION POST OFFICE BOX 3227SPRINGFIELD, ILLINOIS 62708-3227PHONE: (217) 529-6601 FAX: (217) 529
244306 051910BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTYBunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:1) All equipment oth
3CONTENTS Warranty ...2 Introduction ...3 User Not
4ELECTRICAL REQUIREMENTSWARNING - The dispenser must be disconnected from the power source until specified in Initial Set-Up.Refer to Data Plate on the
5INITIAL SET-UPCAUTION - The dispenser must be disconnected from the power source throughout the initial set-up, except when specified in the instructi
Program lockout switch:The switch must be in the “SET” position in order to access the program modes.1. Disconnect the dispenser from the power sourc
72. The display will now show the model number. (H5H) 5 Gallon High Voltage Unit (200-240V) (H5L) 5 Gallon Low Voltage Unit (100-120V) Now scroll
8LEVEL 2 PROGRAMMINGH2 - F° OR C° SELECTION1. To enter Level 2 Programming, press and hold the upper hidden button until H2 appears on the display. R
9DRAINING THE DISPENSERCAUTION - The dispenser must be disconnected from the power source throughout these steps.1. Disconnect the dispenser from the
Kommentare zu diesen Handbüchern